(GX Error) unknown_font_scaler_error = gxFirstFontScalerError (-27900) + 20

(GX Error) font_scaler_streaming_aborted = gxFirstFontScalerError (-27900) + 19

(GX Error) font_scaler_api_version_mismatch = gxFirstFontScalerError (-27900) + 18

(GX Error) font_scaler_fixed_overflow = gxFirstFontScalerError (-27900) + 17

(GX Error) font_scaler_invalid_matrix = gxFirstFontScalerError (-27900) + 16

(GX Error) font_scaler_internal_error = gxFirstFontScalerError (-27900) + 15

(GX Error) font_scaler_rasterizer_error = gxFirstFontScalerError (-27900) + 14

(GX Error) font_scaler_hinting_error = gxFirstFontScalerError (-27900) + 13

(GX Error) unsupported_font_scaler_font_format = gxFirstFontScalerError (-27900) + 12

(GX Error) unsupported_font_scaler_stream_format = gxFirstFontScalerError (-27900) + 11

(GX Error) unsupported_font_scaler_outline_format = gxFirstFontScalerError (-27900) + 10

(GX Error) required_font_scaler_table_missing = gxFirstFontScalerError (-27900) + 9

(GX Error) font_scaler_outline_allocation_failed = gxFirstFontScalerError (-27900) + 8

(GX Error) font_scaler_bitmap_allocation_failed = gxFirstFontScalerError (-27900) + 7

(GX Error) font_scaler_getfonttable_failed = gxFirstFontScalerError (-27900) + 6

(GX Error) font_scaler_newblock_failed = gxFirstFontScalerError (-27900) + 5

(GX Error) invalid_font_scaler_font_data = gxFirstFontScalerError (-27900) + 4

(GX Error) invalid_font_scaler_input = gxFirstFontScalerError (-27900) + 3

(GX Error) invalid_font_scaler_context = gxFirstFontScalerError (-27900) + 2

(GX Error) null_font_scaler_input = gxFirstFontScalerError (-27900) + 1

(GX Error) null_font_scaler_context = gxFirstFontScalerError (-27900)

(GX Error) illegal_font_parameter = -27943

(GX Error) font_cannot_be_changed = -27944

(GX Error) unflattening_interrupted_by_client = -27945

(GX Error) could_not_dispose_backing_store = -27946

(GX Error) internal_layout_error = gxFirstNonfatalError (-27950) + 2

(GX Error) internal_font_error = gxFirstNonfatalError (-27950) + 1

(GX Error) internal_error = gxFirstNonfatalError (-27950)

(GX Error) could_not_create_backing_store = gxFirstFatalError (-27999) + 4

(GX Error) not_enough_memory_for_graphics_client_heap = gxFirstFatalError (-27999) + 3

(GX Error) no_outline_font_found = gxFirstFatalError (-27999) + 2

(GX Error) internal_fatal_error = gxFirstFatalError (-27999) + 1

(GX Error) out_of_memory = gxFirstFatalError (-27999)

scsiVendorSpecificErrorBase = -7808 •Start of third-party error range

scsiPluginInternalError = -7848 •Internal consistency check failed

1)scsiCannotLoadPlugin •No matching service category
2)scsiFamilyInternalError • Internal consistency check failed •-7849

scsiBadConnType = -7850 •Bad connection type

scsiUnused85 = -7851

scsiUnused84 = -7852

scsiTargetReserved = -7853 •Target already reserved

scsiIOInProgress = -7854 •Can't close conn, IO in prog

scsiUnused81 = -7855

scsiBadConnID = -7856 •Bad Connection ID

scsiUnused79 = -7857

scsiInvalidMsgType = -7858 •Invalid message type (internal)

scsiPartialPrepared = -7859 •could not do full prepare mem for I/O

scsiBadDataLength = -7860 •a zero data length in PB

scsiUnused75 = -7861

scsiUnused74 = -7862

scsiCDBLengthInvalid = -7863 •scsiCDBLength field is too big

scsiTransferTypeInvalid = -7864 •scsiTransferType field is too high

scsiDataTypeInvalid = -7865 •scsiDataType requested not supported

scsiIDInvalid = -7866 •The initiator ID is invalid

scsiLUNInvalid = -7867 •LUN supplied is invalid

scsiTIDInvalid = -7868 •Target ID supplied is invalid

scsiBusInvalid = -7869 •Bus ID supplied is invalid

scsiRequestInvalid = -7870 •PB request is invalid

scsiFunctionNotAvailable = -7871 •The requ. func is not available

1)scsiPBLengthError •(scsiPBLength is insuf'ct/invalid
2)scsiParameterErrors = -7872

scsiQLinkInvalid = -7881 •pre-linked PBs not supported(The QLink field was nonzero)

scsiNoSuchXref = -7882 •no such RefNum xref

scsiDeviceConflict = -7883 •sorry, max 1 refNum per DeviceIdent

scsiNoHBA = -7884 •No HBA detected Error

scsiDeviceNotThere = -7885 •SCSI device not installed/there

scsiProvideFail = -7886 •Unable to provide requ. capability

scsiBusy = -7887 •SCSI subsystem is busy

1)scsiTooManyBuses •Register failed because we're full
2)scsiNotExecutedErrors = -7888

scsiCDBReceived = -7910 •The SCSI CDB has been received

scsiNoNexus = -7911 •Nexus is not established

scsiTerminated = -7912 •PB request terminated by the host

scsiBDRsent = -7913 •A SCSI BDR msg was sent to target

scsiUnused16 = -7914

scsiWrongDirection = -7915 •Data phase was in wrong direction

scsiSequenceFailed = -7916 •Target bus phase sequence failure

scsiUnexpectedBusFree = -7917 •Unexpected BUS free

scsiDataRunError = -7918 •Data overrun/underrun error

scsiUnused11 = -7919

scsiAutosenseFailed = -7920 •Autosense: Request sense cmd fail

scsiParityError = -7921 •Uncorrectable parity error occured

scsiSCSIBusReset = -7922 •SCSI bus reset sent/received

scsiMessageRejectReceived = -7923 •Message reject received

scsiIdentifyMessageRejected = -7924

scsiCommandTimeout = -7925 •Command timeout

scsiSelectTimeout = -7926 •Target selection timeout

scsiUnableToTerminate = -7927 •Unable to Terminate I/O PB req

scsiUnused08 = -7928

scsiUnused07 = -7929

scsiUnused06 = -7930

scsiUnused05 = -7931

scsiNonZeroStatus = -7932 •PB request completed with an err

scsiUnableToAbort = -7933 •Unable to Abort PB request

scsiRequestAborted = -7934 •PB request aborted by the host

1)scsiErrorBase
2)scsiExecutionErrors = -7936

OSAControlFlowError = -2755 •Signaled when illegal control flow occurs in an application (no catcher for throw, non-lexical loop exit, etc.)

OSAInconsistentDeclarations = -2754 •Signaled when a variable is declared inconsistently in the same scope, such as both local and global

OSAUndefinedVariable = -2753 •Signaled when a variable is accessed that has no value

OSADuplicateHandler = -2752 •Signaled when more than one handler is defined with the same name in a scope where the language doesn't allow it

OSADuplicateProperty = -2751 •Signaled when a formal parameter, local variable, or instance variable is specified more than once

OSADuplicateParameter = -2750 •Signaled when a formal parameter, local variable, or instance variable is specified more than once,

OSATokenTooLong = -2742 •Signaled when a name or number is too long to be parsed